首頁 > 產品信息 > 化工 > 化學試驗器具和用品

Carver手動液壓壓片機是非常堅固可靠的，並以特別耐用而著稱。壓力分為12噸、25噸和30噸三種。主要用於紅外分析儀、X射線及X熒光分析儀等樣品的壓制，模具直徑包括31mm、35mm和40mm。
12噸壓片機
3850(Mini C型) 12噸、手動、雙支柱、實驗室液壓壓片機，配有6英吋x6英吋壓盤。緊湊型便攜式，佔地面積小於C型。這款壓片機適合於狹小的空間或放置於手套箱操作，也適於野外操作。壓盤間距可調，堅硬的鋼制結構，確保壓片的精度，配有安全防護罩，英制公制雙顯示表盤。
4350.L 配有4"圓形壓盤的沖模式壓片機，和4350一樣，不帶模具。
3851(C型) 12噸、手動、雙支柱實驗室液壓壓片機，與上面的MiniC相似，但體積稍大，加強了支架，壓盤行程可達18"。英制公制雙顯示壓力表盤。
3968(12-10型) 12噸、手動、雙支柱液壓壓片機，與上面的3851相似，加強了支架，可移動壓盤行程可達16"。英制公制雙顯示壓力表盤。
3969(12-12型) 12噸、手動、四支柱液壓壓片機，確保12"x12"壓盤平穩運行。英制公制雙顯示壓力表盤。
25噸壓片機
3853(M 型) 25噸、手動、雙支柱液壓壓片機，壓盤間距可調。堅硬的鑄鐵和鋼制結構，確保壓片的精度和機器的使用壽命。英制公制雙顯示壓力表盤。
3855(25-12型) 25噸、手動、四支柱液壓壓片機，英制公制雙顯示壓力表盤。
30噸壓片機
3970(30-12型) 30噸、手動、四支柱液壓壓片機，兩級液壓器，第一級用來保壓，第二級用來增壓。英制公制雙顯示壓力表盤。
注： Carver 壓片機可以與AutoPak 系統相連接，實現自動化控制。

以下為美國PE產品
Optima 8x00 Complete O-Ring Kit N0780437
Optima 2x00/4x00/5x00/7x00 DV Complete O-Ring Kit N0770437
Optima 4300V/5300V/7300V Complete O-Ring Kit N0770916
Optima 3x00 XL/3x00 DV/3000 SCX 0.239 i.d., 0.070 w.d. 09902006
Optima 3x00 XL/3x00 DV/3000 SCX 0.364 i.d., 0.070 w.d. 09902015
Optima 3x00 XL/3x00 DV/3000 SCX 8.74 i.d., 1.78 w.d. 09921028
Optima 3x00 XL/3x00 DV/3000 SCX/4300V/5300/7300V (Inside) 0.239 i.d., 0.070 w.d. 09902207
Optima 3x00 XL/3x00 DV/3000 SCX/4300V/5300/7300V (Outside) 0.301 i.d., 0.070 w.d. 09902247
Optima 4300V/5300V/7300V (For Ball Joint) 0.301 i.d., 0.070 w.d. 09926070Optima 8x00 0.80 mm i.d. N0781018
Optima 8x00  1.2 mm i.d.  N0781019
Optima 8x00
(1.2 mm entire length of tube)
1.2 mm i.d.  N0781013
Optima 8x00 1.6 mm i.d.  N0781016
Optima 8x00 2.0 mm i.d. N0781050
Optima 8x00  3.0 mm i.d. N0781017
Optima 2x00/4x00/5x00/7x00 DV 0.80 mm i.d. N0775225
Optima 2x00/4x00/5x00/7x00 DV 1.2 mm i.d. N0775226
Optima 2x00/4x00/5x00/7x00 DV 1.6 mm i.d. N0775223
Optima 2x00/4x00/5x00/7x00 DV 2.0 mm i.d. N0775014
Optima 2x00/4x00/5x00/7x00 DV 3.0 mm i.d. N0775224
Optima 3x00 XL/3x00 DV/
3000 SCX/4300V/5300V/7300V
0.8 mm i.d. N0695461
Optima 3x00 XL/3x00 DV/
3000 SCX/4300V/5300V/7300V
1.2 mm i.d. N0695460
Optima 3x00 XL/3x00 DV/
3000 SCX/4300V/5300V/7300V
1.6 mm i.d. N0695449
Optima 3x00 XL/3x00 DV/
3000 SCX/4300V/5300V/7300V
2.0 mm i.d. N0695442

Flowcell 10 mm x 15 µL N2920126

Flowcell Assembly 10 mm x 15 µL N2920160

Flowcell 10 mm x 12 µL N2922107

Flowcell 4.5 mm x 5 µL N2922030

FL 3 µL Flowcell w/ Assembly N2922211

Flowcell Assembly  (w/ heat exchanger)10 mm x 8 µL N2350211

Flowcell 10 mm x 8 µL N2350162

Deuterium Lamp N2920149

Tungsten Lamp N2920146

Deuterium Lamp 02712266

Tungsten Lamps 02712273

Deuterium Lamp N2925030

Tungsten Lamp N2922011

Deuterium Lamp (Phase 2) N2922046

Tungsten Lamp N2922011

Detector Lamp N2351285

Xenon Lamp N2922082

Xenon Lamp L2251157

Festoon Lamp 04969486

120  V N9306213

230  V N9306214Purity: 94.0 –     99.5%Phthalate-freeHydrocarbon-freeFlow  Rates 10  –     50    lpmDelivery    pressure 8       barAmbient     temperature 10       °C   –     35    °CPowerconsumption 1400   WattsNoise     level <58 dB   (A)Electrical       requirements 120    V     /      60    Hz,  20    Amp       Nema      5Lab       capacity  at     nominal   conditions:Ambient       temperature: 20      °C/  68    °FAmbient      pressure: 1013       mbar(a).Dimensions      (net): 90  cm   W    x     31    cm   D       x     70    cm   HWeight  (shipping) 127.4     kg,   280  lbsN2-22 Mid  Flow       Nitrogen  Generator            without Air CompressorN9306210

Purity: 95.0     –     99.5%

Atmospheric   Dewpoint -58  °F    (-50 °C)

Particles  >0.01      μm: None

Suspended      liquids: None

Min./Max.      operating pressure: 60/145     psig (4.0/10    barg)

Ambient  operating temperature   

range:     

60    °F    –     95    °F    (15 °C – 35 °C)

Inlet air    temperature    range: 60 °F    –     95    °F    (15  °C   –     35    °C)

Maximum       recommended inlet air   

temperature

110  °F    (43  °C)

Electrical requirements: None

Dimensions     (net): 45  cm   W    x     41    cm   D     x     130  cm   H

Weight    (shipping): 36  kg,   80    lbs

N2-35 Mid Flow Nitrogen Generator

without Air Compressor

N9306211

Purity: 95.0     –     99.5%

Atmospheric   Dewpoint -58  °F    (-50 °C)

Particles  >0.01      μm: None

Suspended      liquids: None

Min./Max.      operating pressure: 60/145     psig (4.0/10    barg)

Ambient  operating temperature   

range:     

60    °F    –     95    °F    (15 °C – 35 °C)

Inlet air    temperature    range: 60 °F    –     95    °F    (15  °C   –     35    °C)

Maximum       recommended inlet air   

temperature

110  °F    (43  °C)

Electrical requirements: None

Dimensions     (net): 45  cm   W    x     41    cm   D     x     130  cm   H

Weight    (shipping): 41  kg,   90    lbs

N2-45 High Flow Nitrogen Generator

without Air Compressor

N9306212

Purity: 95.0     –     99.5%

Hydrocarbon-free

Phthalate-free

Atmospheric   Dewpoint -58  °F    (-50 °C)

Particles  >0.01      μm: None

Suspended      liquids: None

Min./Max.      operating pressure: 60/145     psig (4.0/10    barg)

Recommended       ambient  

operating temp       range

72    °F    (22  °C)

Inlet air    temperature    range: 60 °F    –     95    °F    (15  °C   –     35    °C)

Maximum       recommended inlet

air    temperature

110  °F    (43  °C)

Inlet/Outlet     ports 1/2”       NPT

Electrical requirements: None (filtration system    only)

Dimensions     (net): 61  cm   W    x     50    cm   D     x140       cm   H

Weight    (shipping) 114 kg,   250  lbs   100  13  99.5

       125  16  99.5

       100  20  99.0

       125  25  99.0

       100  30  98.0

       125  38  98.0

       100  20  99.5

       125  25  99.5

       100  30  99.0

       125  37  99.0

       100  46  98.0

       125  57  98.0

       100  39  99.5

       125  55  99.5

       100  53  99.0

       125  74  99.0

       100  73  98.0

       125  106       98.0

GC/MS PSS Injector Starter Kit N6100447 GC/MS CAP Injector Starter Kit N6100448

5.0 μL Autosampler Syringe 1 N6101390

Vial Locator (dongle) 2 N6101182

PSS Injector Viton o-rings (250 deg) 10 1 N6101747

PSS Injector Kelrez o-rings (350 deg) 1 10 09921004

PSS Split/Splitless Injector, 2 mm, No Wool 2 N6121004

Graphite/Vespel Ferrules, for 0.25 mm Columns 10 2 09920104

PerkinElmer Green Speta (50 pieces) 1 N6621028

Marathon Filament 1 N6470012

Aluminum Oxide Powder (3 oz) 1 4190197

5.0 μL Autosampler Syringe 1 N6101390

Vial Locator (Dongle) 2 N6101182

CAP Injector Viton o-rings (250 deg) 10 N9302783

CAP Injector Kelrez o-rings (350 deg) 10 N9302782

CAP Split/Splitless Injector, 4 mm, No Wool 2 N6121004

Graphite/Vespel Ferrules, for 0.25 mm Columns 10 2 09920104

PerkinElmer Green Speta (50 pieces) 1 N6621028

Marathon Filament 1 N6470012

Aluminum Oxide Powder (3 oz) 1 4190197

Clarus SQ 8C

120/230V (EI/CI – 255 L/sec turbomolecular pump)

N6480011

Clarus SQ 8T

120/230V (EI – 255 L/sec turbomolecular pump)

N6480012

Clarus SQ 8S

120/230V (EI – 75 L/sec turbomolecular pump)

N6480013

Clarus SQ 8S

120/230V (EI – 75 L/sec oil turbomolecular pump)

N6480021

Marathon Filament for PerkinElmer GC/MS Systems N6470012

D-Swafer Complete Kit – for Clarus GC units only 

(for Clarus 680/580 GCs with PPC) Includes all

required installation hardware user guides, and 

the D-Swafer.

N6520273

S-Swafer Complete Kit – for Clarus GC units only 

(for Clarus 680/580 GCs with PPC) Includes all

required installation hardware, user guides, and 

the S-Swafer.

N6520272

Micro-Channel Kit for Existing Clarus

680/600/580/500 GC with PPC. Includes all 

hardware required to install a Swafer. The Swafer 

and installation are not included and must be

purchased separately.

N6520270

Micro-Channel Kit for Existing Clarus

680/600/580/500 GCs with PreVent currently

installed. If PreVent is already included in the

GC configuration, this hardware kit provides the

additional parts required to install a Swafer. The

Swafer and installation are not included and must be

purchased separately.

N6520271

D-Swafer Dean’s Switch (Swafer only) N9306251

S-Swafer Splitter (Swafer only) N9306262

Solvent venting  Vent unwanted solvent or other large peak from chromatogram  D-Swafer

    S-Swafer

Detector switching  Switch between your detectors of choice anytime during the run or between injections  D-Swafer

Column switching  Make your GC more flexible by choosing which column should be used to chromatograph   D-Swafer

  the injected sample

Heartcutting  Cut your chromatogram and analyze the cut on a different column for a better separation  D-Swafer

Polarity tuning  Tweak the column polarity with serial column for difficult separations  D-Swafer

    S-Swafer

Column selection  Better utilize large and expensive detectors by choosing which of the two columns to monitor  D-Swafer

Carrier-gas swapping  Use a different carrier gas in the injector or sampling system from that used for the   D-Swafer

  chromatography

Peak attenuation  Analyze a wide dynamic range by diluting portions of your chromatography  D-Swafer

Splitting  Split your chromatography between up to four channels (detectors, sniffer ports, etc.)  S-Swafer

  for additional sample information

Column backflushing  Remove unwanted compounds from the column after the analytes have eluted  D-Swafer

    S-Swafer

MS isolation  Perform your MS, column and inlet maintenance without venting for less downtime  D-Swafer

    S-Swafer

Retention-gap purging   Remove large amounts of solvent with cold on-column injection  D-Swafer

Inlet selection  Automate your inlet choices (headspace, thermal desorption, liquid autosampler, etc.)   D-Swafer

  between injections

Injector maintenance  Enable injector septa or liner exchange while the system is still active   D-Swafer

or enhanced large   Prevent solvent vapor from entering column and detector during injector purging  S-Swafer

volume injection

Handle Assembly (Source Blank and Sight) N6480380

SQ8 Maintenance Kit

Tool kit needed to maintain source

N6480360

SQ8 Deluxe Polishing Kit (120 Volt)

Kit for polishing cleanable source parts

N6480361

SQ8 Deluxe Polishing Kit (240 Volt) N6480362

1  Source Lens #3 N6480149

2 Source Spring N6480151

3 Source Lens #2 N6480148

4 Lens Insulator N6480153

5 Source Lens #1 N6480147

6 EI Ion Volume N6480144

7 Insulator (Ion Volume) N6480145

8 Repeller N6480140

9 Insulator (Repeller) N6480141

10 CI Ion Volume N6480146

11 CI Ion Volume Disc N6480154

12 Trap N6480142

13 Insulator (Trap) N6480143

14 Marathon Filament N6470012

EI Trap Rebuilt Kit (Numbers 6-9, 12-13)

Kit replaces the 6 parts of the EI Trap and Ion Volume

N6480460

EI Source Complete Rebuild Kit (Numbers 1-9, 12-14)

Kit replaces the 12 parts of the EI Source including the Marathon Filament

N6480461

Complete CI Source

Consists of a fully assembled CI Source, ready to install

N6480130

Complete EI Source

Consists of a fully assembled EI Source, ready to install

N6480132

El to Cl Upgrade Kit