| 型號： | DNH-E |
|---|---|
| 品牌： | HR |
| 原產地： | 中國 |
| 類別： | 工業設備 / 其他工業設備 |
| 標籤︰ | 點焊機 , 汽車電機 , 整流子點焊 |
| 單價： |
-
|
| 最少訂量： | 1 件 |
| 即時通訊: | 最後上線︰2012/05/28 |
|
基本信息 |
|
該整點焊機適用於汽車電機，電動工具和微電機等直流電機生產廠家焊接電樞引線到它的換向器。將電樞放入定位模具，雙手按下啟動開關，機器能自動點焊和分度，直至電樞點焊完成並退回初始位置。然後移去電樞放入另一個電樞，又重新開始此循環。
|
|
技術參數
|
|
|
|
產品特點
|
|
1、能自動完成電樞頂緊、定位、焊接、分度、退回的全套動作，自動化程度高。
2、採用進口伺服電機驅動分度機構，定位精確，可靠性好。
3、採用日本米亞基MIYACHI電阻焊接控制裝置，控制焊接電流（次級電流反饋），可儲存15種焊接規範。
4、PLC可編程控制器，控制焊接循環動作。
5、液晶觸摸屏作為人機界面，完成參數輸入操作。
6、採用水制冷裝置，對焊接迴路各發熱部分進行循環水冷卻。
7、配有焊接煙霧排出接口。
|
|
英文資料
|
|
DNH-E digital-controlled commutator spot welder
This welder can be used for the manufacturers of DC motors, such as automobile motors, electronic power tools, micro motor and etc., to weld armature leading wires to its commutator. Put the armature in the localization place and push the starting switch by hands, and then the machine will automatically weld the armature and calibrate the angles until all of the welding have been completed and the machine comes back to the initial state; then remove the finished armature, put in another one, and a new cycle will begin .
This equipment has the following characteristic:
1. Able to automatically complete the entire operations of clamping armature, localization, welding, calibrating angle and quitting; highly automatic routine.
2.Using the servomotor to drive the machine to calibrate the angles, which makes accurate localization and well reliability..
3. Welding current is controlled by the Japan’s MIYACHI resistor-welding controller (secondary current feedback) which can storage 15 kinds of welding standards.
4. PLC programmable controller controls welding cycle operations.
5. Liquid-crystal display touch screen as the human-machine interface to input the parameters.
6. The cycle water cooling system is used to cool all of the heating parts in the welding system.
7. Equip a connection to discharge welding smoking.
|
| 付款方式︰ | 銀行轉賬 |
|---|---|
