產品描述
GRINNELL VALVES 格林奈爾蝶閥,格林奈爾閥門,1000系列,8000系列,WC-8100,GHP系列GRINNELL VALVES 格林奈爾蝶閥(現貨)
GRINNELL VALVES 格林奈爾蝶閥(現貨)
的詳細介紹
GRINNELL VALVES 格林奈爾蝶閥 GRINNELL VALVES 格林奈爾蝶閥(現貨)
主要包括1000,8000,GHP三大系列
歡迎來到Grinnell閥門公司
Grinnell格林奈爾是工業、商業和建築市場閥門的領先製造商。
Grinnell格林奈爾閥門採用最先進的加工設備生產。每個閥門在出廠前都經過110%的打壓測試,確保每一個閥門的安全可靠。
BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.
STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability.
STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support.
SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi.
Dead-End Service
The l ed body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.
TESTING
Each valve is individually tested for bubble-tight closure at 110% of full rated pressure.
|
現貨供應GIRNNELL VALVES 美國格林奈爾光桿蝶閥,氣動蝶閥,現貨口徑有:DN80mm,DN100mm,DN150mm等規格。
型號為:
GRINNELL 080 WC-8100/6G/AN150
GRINNELL 100 WC-8100/6G/AN150
GRINNELL 150 WC-8100/6G/AN150
BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.
STEMS
Heavy-duty, two-piece design allows for easy maintenance. Stems are secured by the use of retaining pins.
BEARINGS
Two bronze or Teflon®* bearings are standard on 2"-12". Sizes above 12" have full-length bearings on upper and lower stems.
Stem/Disc Attachment
Rectangular drive ensures proper disc connection. No pins or bolts are exposed to flow.
Seat
Elastomer, reinforced with phenolic backing ring, enables valve to be used on pressure or vacuum service. Seat can be field replaced. Grinnell's special double seal design eliminates the need for flange gaskets. Three stem seal O-rings are molded into the the seat liner to back up the primary stem seal.
DISC
Streamlined for maximum flow and minimum seat wear. Ease of maintenance due to the elimination of bolts, pins, etc., as disc to stem connectors.
Dead-End Service
A unique patented lip, integral to the body prevents the liner from moving downstream, eliminating seat and flange leakage. This feature allows lug valve to be used in uni-directional, dead-end service applications at full rated pressure without the use of downstream flange
BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.
STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability.
STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support.
SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi.
Dead-End Service
The l ed body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.
TESTING
Each valve is individually tested for bubble-tight closure at 110% of full rated pressure.
|
BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.
STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability.
STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support.
SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi.
Dead-End Service
The l ed body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.
TESTING
Each valve is individually tested for bubble-tight closure at 110% of full rated pressure.
|
產品圖片
圖 1
免責聲明:以上信息由企業自行提供,內容的真實性和合法性由發布企業負責。「自助貿易」對此不承擔任何保証責任。
舉報投訴:如發現違法和不良資訊,請
點此處舉報。