首頁 > 產品信息 > 建築、裝飾 > 阻燃材料

氣凝膠絕熱氈--FMB400

FMB400系列產品以納米二氧化硅氣凝膠為主體材料，通過特殊工藝復合而成。具有導熱係數低、密度小、柔韌性高、綠色環保、防水等優越性能，同時兼具優越的隔聲減震性能，可取代玻璃纖維、石棉保溫氈、硅酸鹽纖維等不環保、保溫性能差的傳統柔性保溫材料。

Using special nanotechnology, FMB400 combines a silica aerogel with reinforcing fibers to deliver very low thermal conductivity, low density and good flexibility in an environmentally safe product. FMB400 provides excellent properties of waterproof, sound absorption and shock absorption.

FMB400 is an alternative to the common, environment unfriendly, inferior insulation products, such as PU, asbestos insulation felt, silicate fibers, etc.

 

物理性能Physical Properties
	FMB400（2；3；6）
產品厚度Thickness	2mm  3mm  6mm
寬度Width	1200mm
長度Length	30m
使用溫度Use Temp.	0-400 ℃
顏色Color	黑色Black
密度Density	200 ± 20kg/m3
導熱係數(25℃) Thermal Conductivity	≤0.018W/(m·K)

 

主要性能特點Properties

保溫絕熱
    FMB400長期最高使用溫度達400℃，導熱係數僅為傳統材料的1/3~1/5，保溫后熱損失小，空間利用率高，高溫下性能優勢更加明顯。

Superior Thermal Performance
 The maximum use temperature is 400℃,

Its thermal conductivity is 1/3~1/5 of common insulators, helping reducing heat loss and optimizing space utility.

持久耐熱
   氣凝膠獨有的三維網絡結構避免了其他保溫材在長期高溫或受到振動而產生燒結變形、顆粒堆積保溫性能急劇下降的現象。

Long service life

Unlike other traditional insulation materials, aerogel ’s three- dimensional, intertwined structure inhibits sintering warpage, and particles stack which may occur under high temperature for long time. Therefore, aerogel insulation has long service life.

 

抗拉抗裂
   有較好的柔性與抗拉強度，可抵抗施工時的拉伸和冷熱交替時線性收縮帶來的內應力。

Physically Robust

   FMB400 has flexibility and high tensile strength, resisting stretching and stress from linear contraction when temperature changes.

環保防腐
   產品由無機材料組成，不含對人體有害的物質。可溶出氯離子含量極小，對設備和管道無腐蝕。

Environmentally Safe
 Composed of inorganic materials, FMB400 contains no hazard. Stripping little chloridionm will cause no corrosion to the equipments and pipes.

隔聲抗震
    對設備進行保溫的同時，還可以起到吸聲降噪、緩衝震動等功能，提高環境質量，保護設備。

Sound resistance and Shock Absorption
sound resistance and shock absorption help better the environment quality.

便於施工
   產品密度低於200kg/m3，輕巧方便，易於切割，施工效率高 。

Easy to Install

Extremely low density (<200kg/m3) contributes to easy-to-cut and easy-to-install

 

 

 

 

 

 

 

 

不同溫度下導熱係數Thermal Conductivity at Different Temperature

不同溫度下導熱係數Thermal Conductivity at Different Temperature
溫度（℃）Temperature	100	200	300	400
導熱係數(W/(m·K)) Thermal Conductivity	0.017	0.021	0.025	0.030

 

性能參數Specification Compliance and Performance

測試內容 Properties	測試結果Results	測試方法Test Procedure
尺寸穩定性(max) Dimensional Stability	1%	GB/T 8811
壓縮性能(min),Kpa,@10%                               @25% Compressive Stress Strain	60	GB/T 13480
	120
燃燒等級Fire Rating	S4	E DIN 5510
煙霧等級Smoke Spread	SR-2
滴落物等級Flaming Droplets	ST-2
煙氣毒性FED值,max   LCo	0.1
耐腐蝕性Corrosion Resistance	通過passed	GB/T 3810
拉伸強度(min),Kpa Tensile Strength	100	GB/T 17911

 

施工厚度Thicknesses Required to Prevent Surface Condensation

不同溫度、管徑時的施工厚度 Thicknesses(mm) vs. Temperature (℃) and Nominal Pipe Size
工況條件：環境溫度=25℃,最高表面溫度=50℃,風速=0m/s. Design conditions: ambient temperature = 25℃, Wind speed = 0m/s, Max. touch temp = 50℃
公稱尺寸DN(mm) nominal size	15	20	25	32	40	50	65	80	90	100	125	150	200	250	300	350	400
200℃	6	6	12	12	12	12	12	12	12	12	12	12	12	12	12	12	12
300℃	12	12	18	18	18	18	18	18	18	18	18	18	18	24	24	24	24
400℃	18	24	24	24	24	30	30	30	30	30	30	30	36	36	36	36	36

以上數據僅供參考，具體解決方案請咨詢相關技術人員。

These data are provided as an example only. Actual performance should be determined using the parameters relevant to the particular application. Please contact us for technical ssistance.