首頁 > 產品信息 > 電子、電力 > 電子元器件 > 電容器

HITACHI AIC Inc. 

Screw terminal type aluminum electrolytic capacitor 
ALUMINUM ELECTROLYTIC CAPACITOR
@ .Product Name and Type
        1.   Product Name : Alminum Electrolytic Capacitor
        2.   Shape              : Metal
        3.   Type                 : SERIES   (85℃,2000h)

Screw and Mounting Bracket will not be attached with Capacitor.
@ .Specifications
        1, Operating Temperature Range: 一40~+85℃
        2. Capacitance Tolerance            : 一20~+20% (at 120Hz 20℃)
        3, tan8 (Dissipation Factor)          :0.15   (at 120Hz 20℃)
        4. Rated Voltage                           :
        5. Surge Voltage                           :   
        6. Capacitance                              :
        7, Leakage Current                       :
        8. Permissible Ripple Current     :
Permissible ripple current stated below. Capacitors temperature.
applied is be calculated for conversion, using the figure shall be used within 60A from restriction on 
M5 terminals temperture.

Part Number,    Rated Voltage VDC,   Surge  Voltage VDC,   Nominal capacitance, Leakage:Current (mA)  , Max. Ripple Current(Arms),          size  Φ*L 
CEB2G102Y         400V                                 450V                               1000UF                       4.0                                             5.0                       51*75mm
CEB2G222Y         400V                                 450V                               2200UF                       5.0                                             9.2                       51*130mm
CEB2G272Y         400V                                 450V                               2700UF                       5.0                                             9.9                       51*130mm
CEB2G332Y         400V                                 450V                               3300UF                       5.0                                            11.8                       64*115mm
CEB2G472Y         400V                                 450V                               4700UF                       5.0                                            14.9                       77*115mm
CEB2G562Y         400V                                 450V                               5600UF                       5.0                                            19.1                       77*130mm
CEB2G682Y         400V                                 450V                               6800UF                       5.0                                            17.0                       77*155mm
CEB2G822Y         400V                                 450V                               8200UF                       5.0                                             23.5                       90*157mm
CEB2G103Y         400V                                 450V                             10000UF                       5.0                                             25.9                       90*157mm

9.   Withstand voltage   (Between terminals   bundled and Bracket)     :1500V.AC, lminute  

10.   High temperature  Loading  :   
Application of permissible ripple current at 50Hz to the capacitors for 2000 hours at the ambient temperture of  85 0C with a maximum voltage so that the sum of a peak of DC and AC voltages becomes equivalent of the rated
voltage. These shall be kept for 12 to 24 hours under standard condition(comply with JIS-C-5102) and shall be satisfied with the following. Leakage Current;No more than initial value specified Capacitance Change;士15% initial value measured Dissipation Factor;No more than 17596 of initial value specified Appearance;No notable change to be found.   

11.High Temperature  Storage    (Steady State):
After storage of 500 hours at  850C with out voltage applied, rated volltage is applied for one hour through a 1kSZ resistor at 200C then stabilized for 12 to 24 hours. After completion of this, electrical measurement is made. Capacitor characteristics shall be satisfied with the following.       Leakage Current;No more than initial value specified
Capacitance Change;士15% initial value measured   Dissipation Factor;No more than 175% of initial value specified
 Appearance;No notable change to be found
12.  Surge Voltage:  
The surge voltage is applied for 1000 cycles at  85℃of 30±5 seconds at voltage through a 1kΩ series resistor for a period of 6士0.5 minutes. These shall be kept for 12 to 24 hours under standard condition and shall be
be satisfied with the following. 
Leakage Current :        No more than initial value specified
Capacitance Change: 士15% initial value measured
Dissipation Factor:      No more than initial value specified
Appearance:                No notable change to be found

Size may be selected Medium and high voltage, large capacitance, screw, high ripple current Used in storing energy of electric welder and UPS, air conditioners etc.