首頁 > 產品信息 > 化工 > 潤滑劑

Castrol Optimol Paste White T
®
嘉實多Optimol粘貼白色T產品數據
嘉實多Optimol粘貼白色T
®
嘉實多Optimol粘貼白色T - 潔淨的裝配工作白色漿料,
防止微動腐蝕(假brinelling)。緊身組件可能
沒有任何困難,甚至解體后多年的運作。
嘉實多Optimol粘貼白色T是很好適用於所有的大會工作
為基薄膜潤滑所有工程領域。
嘉實多Optimol粘貼白色T也是可以作為噴霧。
特點
抑制微動腐蝕和虛假brinelling
清潔處理
組裝和拆卸方便
分離效果好所有類型的接觸
耐冷熱水
即使是在鹽優良的防鏽保護水
白色,幾乎無色的薄膜層
簡單應用(噴霧無氟氯化碳)
溫度適用範圍:-30 ° ° F至+250 C/-22℃/ 482 F
美國農業部批准氫氣
用途
大會粘貼具有普遍的應用範圍,由於其清潔處理
長期分離和潤滑效果。高級黑色集會
在性能測試潤滑油的各種應用。
防止微動的軸承密封件,花鍵軸,扭矩加載腐蝕
連接。
嘉實多Optimol粘貼白色T是一個可靠的解決方案暴露機
對摩擦振動。
緊身部件受到震動。
由於這些結果是非常優秀的連接容易煩惱
腐蝕。
避免運轉時產生噪音
成功的潤滑液壓缸
良好的分離時,墊圈或法蘭連接密封用。
產品數據
應用
申請前的表面清潔
即使應用層嘉實Optimol粘貼白色T與毛筆或皮棉免費
搖嘉實Optimol粘貼白色T噴塗均勻后使用。噴霧薄
甚至到一層潤滑劑潤滑表面。
嘉實多Optimol粘貼白色T是唯一貼上特定的應用場合
並不能代替油或脂潤滑。
不與其他油脂混合,粘貼或油。
典型特征
白
油脂類化合物+白色
固體潤滑劑和礦物油
NLGI一致性,德國DIN 51818,NLGI等級
一
工作滲透,根據DIN ISO 2176,0.1毫米
310-340
密度,德國DIN 51757,公克╱立方公分
1.2000
@ 20 ° C/68號° F
耐水,德國DIN標準51807噸一,
@ 90 ° C/194 ° F
0
埃里克森螺絲測試,總摩擦,德國DIN 946
.77
除常用的製造公差Castrol Optimol Paste White T - white paste for clean assembly work,
prevents fretting corrosion (false brinelling). Tight fitting components may be
disassembled without any difficulties even after many years of operation.
Castrol Optimol Paste White T is excellently suited for all assembly work and
for base thin-film lubrication in all engineering areas.
Castrol Optimol Paste White T is also available as a spray.
Features
inhibits fretting corrosion and false brinelling
clean handling
facilitates assembly and disassembly
good separating effect for all types of contact
resistant to cold and hot water
excellent rust protection even in salt water
white, almost colorless in thin layers
easy application (spray-without CFC)
temperature application range: -30°C/-22°F to +250°C/+482F
USDA-H2 approval
Uses
Assembly paste with universal application range due to its clean handling
and long-term separating and lubricating effect. Superior to black assembly
lubricants in performance tests for a variety of applications.
Prevents fretting corrosion on bearing seals, spline shafts, torque loaded
connections.
Castrol Optimol Paste White T is a reliable solution for machines exposed
to frictional vibrations.
Tight-fitting components subjected to vibrations.
Excellent results as these connections are extremely vulnerable to fretting
corrosion.
Avoidance of squeaking noises
Successful lubrication of hydraulic cylinders
Good separation when used on gaskets or seals on flange connections.
Product Data
Application
Clean surface before application
Apply even layer of Castrol Optimol Paste White T with a brush or lint free
Shake Castrol Optimol Paste White T spray well before use. Spray thin and
even layer of lubricant on to lubricating surface.
Castrol Optimol Paste White T is only suitable for paste-specific applications
and cannot replace oil or grease lubrication.
Do not mix with other greases, pastes or oils.
Typical Characteristics
white
grease-like compound + white
solid lubricants and mineral oil
NLGI consistency, DIN 51818, NLGI Grade
1
Worked penetration, DIN ISO 2176, 0.1 mm
310-340
Density, DIN 51757, g/cm3
1.2000
@ 20°C/68°F
Water resistance, DIN 51807 T. 1,
@ 90°C/194°F
0
Erichsen screw test, total friction, DIN 946
.77
Subject to Usual Manufacturing Tolerances