|產品規格︰||Aluminium Steel Stem
Length Measurement: Sending Unit length should be a minimum of one (1) inch less than the plastic tank depth, and one (1) inch less than the metal tank depth. Note: If metal tank surface flexes, deduct one (1) inch from the depth. (like plastic tank)
Lengths Available: Four (4") through Sixty(60") inches, with one inch increments .
Material: Aluminium Steel Stem
Mounting Method: SSS & SSL: - Standard SAE 5 hole patterns, 2.125” bolt circle, 240 – 30 ohm operation. Note: Units are supplied with a gasket, but without mounting screws.
Special Application Senders:
For Dual Station, Special ohms ranges (other than 240-30 ohms), Calibrated, Custom, Adjusted, or Special application units, Please contact us