首頁 > 產品信息 > 工業設備 > 其他工業設備

Product Description

1.The roller veneer dryer is the main equipment in the production of plywood
2. It is composed of four parts, which are divided into  Feeding area,Heating area,Cooling area and Discharging area.                       
3. It is mainly used for drying core plate, partial surface and bottom plate.
4. It has high efficiency, low energy consumption, and better meets the production process of the product.
5. This machine adopts two or four layers  rollers to transport the veneer (the device for conveying   the veneer is different according to the thickness of the plate)                        
6.The heat transfer oil is the heating medium (the heating source can be changed according to  the requirements of different customers and ΔThe above quote does not include heat source configuration)                    
7. During the propulsion process, the plate is leveled by the weight of the roller, and the deformation of the plate during the drying process is shaped. The degree plays a key role.
8. The circular plate is heated by the upper and lower circular nozzles of the wind box, and the heated air is recycled through the fan to greatly improve the thermal efficiency.)
9. We can design the veneer dryer as customer`s project requirement.
10. It is suitable for the production process of cutting first and then drying, especially for the drying of thick veneers.
11.This machine adopts a number of high-tech and advanced electronic control technology, so it has the characteristics of high efficiency, energy saving and good dry quality.
12.it is designed according to the unit structure principle. The standard of the machine is 11 sections. The two-meter standard is a drying section,  it can be arbitrarily selected by the customers  according to the output.  (5~15 sections)

 
The veneer drying machine line


​



​


 Advantages of our veneer dryer

   1.Energy Savings Drying the same grade of veneer, we need about 30% less energy than traditional.

   2.Excellent equipment  Axial flow fan application, the same wind power requirements, our fan power is smaller, more energy saving.

   3.Excellent internal circulation design Complete wind pressure closed circulation mode with low heat loss.
   4.The body is assembled as a whole, and the worn parts are easier to replace.(The market is mainly     welded, difficult to dismantle)
   5. Adjustable drainage, no power drainage, saving cost .