首頁 > 產品信息 > 電子、電力 > 其它電力、電子

~TMS125  低煙無鹵阻燃聚烯烴熱收縮標識套管
應用
低煙無鹵阻燃聚烯烴熱收縮標識套管是專為電線電纜標識而設計，由輻照交聯低煙無鹵阻燃聚烯烴材質製成，具有優異的電氣性能、物理性能、化學性能和打印性能，可以方便地用標識打印直接打印，標識持久。不僅符合ROHS和REACH環保指令，而且符合IEC61249-2-21、歐盟2002/72/EC等環保標準的要求。
特性
收縮比：3:1，2:1
柔軟、低煙無鹵阻燃
可以方便打印
優異的打印性能，持久標識，符合SAE AS81531的打印標識要求
優異的電絕緣性能、物理性能和化學性能
符合ROHS、REACH環保規範
顏色
標準顏色：白色、黃色
其他顏色可定製
操作溫度範圍
連續使用溫度範圍：-55℃～125℃
最低起始收縮溫度：70℃
最低完全收縮溫度：110℃
符合標準
SAE AS 81561,MIL-STD-202
UL224 125℃ 600V
性能指標
性能 指標要求 測試方法 典型值
縱向收縮率 ≤10％ ASTM D 2671 ≤5％
抗張強度 10.4MPa min ASTM D 638 ≥12MPa
斷裂伸長率 200％ min ASTM D 638 ≥300％
老化后斷裂伸長率
(熱老化158℃,168小時) 100％ min ASTM D 638 ≥200％
熱衝擊
 無裂紋 ASTM D 2671 無裂紋
低溫柔軟性
（-55℃，4小時） 無裂紋 ASTM D 2671 無裂紋
絕緣耐壓和擊穿 2500V,60sec,不擊穿 ASTM D 2671 不擊穿
擊穿強度 19.7 KV/mm min ASTM D 2671 ≥20KV/mm
體積電阻率 1014Ω•cm min ASTM D 876 ≥1014Ω•cm
腐蝕性 無腐蝕 ASTM D 2671 無腐蝕
阻燃性 1分鐘內自熄 ASTM D 2671 通過
打印性能 50次橡皮擦，可辨認
30次來回擦，可辨認 SAE SA81531
MIL-STD-202 通過
抗液體
（23℃，24小時） 打印吸識別 SAE AS81531 通過
規格尺寸
規格 收縮前（mm） 完全收縮后(mm) 適用線纜範圍（mm）
英制 公制 內徑(min) 內徑(max) 
3:1
3/32 Ф2.4 2.4 0.8 0.9~2.0
1/8 Ф3.2 3.2 1.1 1.1~2.7
3/16 Ф4.8 4.8 1.6 1.8~4.1
1/4 Ф6.4 6.4 2.1 2.3~8.1
3/8 Ф9.5 9.5 3.2 3.5~8.1
1/2 Ф12.7 12.7 4.2 4.6~10.8
3/4 Ф19.1 19.1 6.3 7.0~16.3
1 Ф25.4 25.4 8.5 9.3~21.6
2:1
3/32 Ф2.4 2.4 1.2 1.3~2.3
1/8 Ф3.2 3.2 1.6 1.7~3.1
3/16 Ф4.8 4.8 2.4 2.5~4.7
1/4 Ф6.4 6.4 3.2 3.3~6.3
3/8 Ф9.5 9.5 4.8 4.9~9.0
1/2 Ф12.7 12.7 6.4 6.6~12.0
3/4 Ф19.1 19.1 9.5 10.0~18.5
1 Ф25.4 25.4 12.7 13.0~24.5
11/2 Ф38.1 38.1 19.1 21.0~37.0
2 Ф50.8 50.8 25.4 27.0~48.0
其他規格尺寸可定製

TMS125  Halogen Free Heat Shrinkable Polyolefin Identification Sleeve
Application
    Special designed to meet the requiremwnts of identification of wire and cables. It is made of halogen-free flame retardant polyolefin with excellent electrical, physical, chemical and printing properties. It can be printed by market printed with permanent identification. TMS125 meets the requirement of ROHS, REACH, IEC61249-2-21 and EU2002/72/EC standards.
Characteristics
Shrink ratio:  3:1, 2:1
Flexible, Halogen-free flame-retardant.
Easy to be print.
Excellent printing property, permanent identification, SAE AS81531 applicable.
Excellent electrical, physical, chemical and printing properties.
ROHS and REACH compliant.
Color
Standard color: White, yellow
Other colors are available upon request.
Operating Temperature Range
Operating temperature:  -55℃～125℃
Minimum shrink temperature:  70℃
Minimum fully recovery temperature:  110℃
 Approvals
SAE AS 81561,MIL-STD-202
UL224 125℃ 600V
Property
Property Requirement                                                                                                                                                                                                                                             Test method Typical data
Longitudinal shrinkage ≤10％ ASTM D 2671 ≤5％
Tensile strength 10.4MPa min ASTM D 638 ≥12MPa
Elongation at break 200％ min ASTM D 638 ≥300％
Elongation after aging
（158℃,168hrs） 100％ min ASTM D 638 ≥200％
Heat shock
 No crack ASTM D 2671 No crack
Low-temperature flexibility（-55℃,4hrs） 
No crack 
ASTM D 2671 
No crack
Dielectric voltage withstand 2500V,60sec,no breakdown ASTM D 2671 No breakdown
Dielectric strength 19.7 KV/mm min ASTM D 2671 ≥20KV/mm
Volume resistivity 1014Ω•cm min ASTM D 876 ≥1014Ω•cm
Corrosion No corrosion ASTM D 2671 No corrosion
Flammability Self-extinguishing within one second ASTM D 2671 Pass
Printing performance 50rubs, legible
30strokes, legible SAE SA81531
MIL-STD-202 Pass
Fluid resistance（23℃，24hrs） Printing legible SAE AS81531 Pass
Sizes
Size As supplied (mm) After recovered(mm) Recommended
use range
（mm）
inch mm Inside diameter(min) Inside diameter (max) 
3:1
3/32 Ф2.4 2.4 0.8 0.9~2.0
1/8 Ф3.2 3.2 1.1 1.1~2.7
3/16 Ф4.8 4.8 1.6 1.8~4.1
1/4 Ф6.4 6.4 2.1 2.3~8.1
3/8 Ф9.5 9.5 3.2 3.5~8.1
1/2 Ф12.7 12.7 4.2 4.6~10.8
3/4 Ф19.1 19.1 6.3 7.0~16.3
1 Ф25.4 25.4 8.5 9.3~21.6
2:1
3/32 Ф2.4 2.4 1.2 1.3~2.3
1/8 Ф3.2 3.2 1.6 1.7~3.1
3/16 Ф4.8 4.8 2.4 2.5~4.7
1/4 Ф6.4 6.4 3.2 3.3~6.3
3/8 Ф9.5 9.5 4.8 4.9~9.0
1/2 Ф12.7 12.7 6.4 6.6~12.0
3/4 Ф19.1 19.1 9.5 10.0~18.5
1 Ф25.4 25.4 12.7 13.0~24.5
11/2 Ф38.1 38.1 19.1 21.0~37.0
2 Ф50.8 50.8 25.4 27.0~48.0
Other sizes are available upon request.