| 型號： | AFFF/AR |
|---|---|
| 品牌： | 仟安 |
| 原產地： | 中國 |
| 類別： | 安全、防護 / 消防設備 |
| 標籤︰ | 抗溶性水成膜 , 泡沫 , 滅火劑 |
| 單價： |
-
|
| 最少訂量： | - |
| 最後上線︰2021/12/01 |
抗溶性水成膜泡沫滅火劑（簡稱AFFF/AR ）是一種多功能環保 型泡沫滅火劑，AFFF/AR按與水體積混合后的混含比為泡沫滅 火剤6 ：水94或3 :水97。用於較高溫度下的油類滅火，並適用 于“液下嘖射"滅火。它具有水成膜泡沬滅火劑的滅油類及石 油產品等非水溶性物質的火災特點外，還具有優良的撲救醇、 酷、醛、醛、酣、胺、酒精等水溶性可燃液體的火災。也可作 濕潤兼滲透劑撲救A類火災，具有通用性滅火效果。廣氾應用 于大型化工企業、石化企業、化纖企業、溶剤廠、化工產品倉 庫及油田、油庫、船舶、機庫、汽車庫等單位和燃料易池霧的 場所。抗溶性水成膜泡沫滅火劑嘖射到燃燒的油類或極性溶劑 上時，泡沫能迅速在油類或極性溶剤表面上流動散開並向尚未 直接噴射到的區域擴散，並在油類或極性溶劑表面上形成一層 封閉性很好的水膜或膠膜，隔絕油類或極性溶劑與空氣的接 觸。靠泡沫覆蓋、水膜或膠膜封閉和水的冷卻作用滅火，提高 了現場滅火的效率。其特點還有廣氾用於撲救各種類型B類火 災，滅火性能具有水成膜泡沬滅火劑的滅油類及石油產品物質 火災特點外，並具有抗溶性泡沫滅火劑的撲救酒精、油漆、 醇、酯、醒、醛、酮、胺等極性溶劑和水溶性物質火央特點。
可以簡化撲救未知名的或兼有油類和極性溶剤混雜的B類燃料 火災，故具有通用滅火性。
混合比：
AFFF/AR3%型與水的混合比為3:97 AFFF/AR6%型與水的混合比為6:94 包裝、運輸及貯存要求：
&、產品包裝為25Kg、50Kg、200Kg, 1000Kg噸桶。
b、 產品在運輸、貯存期間不得混入其它化學品及其他它泡沫 滅火劑。
c、 產品應存放在陰涼、乾燥的庫房內，防止暴晒，貯存的環 境溫度低於45℃,高于其最低使用溫度。
Overview:
Anti-solvent water film-forming foam fire extinguishing agent (AFFF/AR for short) is a multifunctional environmentally friendly foam fire extinguishing agent. The mixing ratio of AFFF/AR mixed with water volume is foam fire extinguishing agent 6: water 94 or 3: water 97. It is used for oil fire extinguishing at higher temperatures and is suitable for 'sub-injection' fire fighting. It has the fire characteristics of water-injection foam fire extinguishing agent and non-water-soluble substances such as petroleum products, and also has excellent fire fighting for water-soluble flammable liquids such as alcohol, ester, ettier, aldehyde, ketone, amine and alcohol.. It can also be used as a moisturizing and penetrating agent to fight Class A fires, and has a universal fire extinguishing effect. Widely used in large chemical enterprises, petrochemical enterprises, chemical fiber enterprises, solvent factories, chemical product warehouses and oil fields, oil depots, ships, hangars, automobile warehouses and other units and places where fuel is easy to leak. When the anti-soluble aqueous film-forming foam fire extinguishing agent is sprayed onto the burning oil or polar solvent, the foam can quickly spread on the surface of the oil or polar solvent and diffuse to the area not directly sprayed, and in the oi Or a well-sealed water film or film is formed on the surface of the polar solvent to isolate the contact of the oil or polar solvent with air. Extinguishing the fire on the spot by means of foam covering, water film or film sealing and water cooling. It is also widely used to extinguish various types of Class B fires. The fire extinguishing performance has the characteristics of oil-forming film fire extinguishing agent for oil-extinguishing and petroleum product material fire, and it has anti-solvent foam fire extinguishing agent to save alcohol, paint and alcohol., esters, ethers, aldehydes, ketones, amines and other polar solvents and water-soluble substances fire characteristics. It can simplify the fire of Class B fuels that are not well-known or have a mixture of oil and polar solvents, so it has universal fire-extinguishing properties.
mixing ratio:
AFFF/AR3% type and water mixing ratio is 3:97 AFFF/AR6% type and water mixing ratio is 6:94 Packaging, transportation and storage requirements:
The product packaging is 25Kg, 50Kg, 200Kg plastic drum, 1000Kg ton barret.
The product shall not be mixed with other chemicals and other foam fire extinguishing agents during transportation and storage.
The product should be stored in a cool, dry warehouse to prevent exposure. The ambient temperature of storage is lower than 45*C. which is higher than its minimum use temperature.
