型號: | QD1002 |
---|---|
品牌: | 啟點時代 |
原產地: | 中國 |
類別: | 電子、電力 / 電子元器件 / 集成電路 |
標籤︰ | usb , 下載線 , latti |
單價: |
¥420
/ 件
|
最少訂量: | 1 件 |
一、產品介紹 ispDOWNLOAD下載電纜適用於所有的Lattice器件進行在系統編程的硬件連接產品。用戶通過 ispLEVER或 PAC-Designer 軟件完成邏輯設計並生成編程文件后,Lattice的 ispVMTM System Software 軟件即可直接在 PC上對器件進行編程。除下載電纜外,不需要其他的元器件即可完成對器件的編程。 該電纜支持對所有1.2 伏、1.8 伏、2.5 伏、 3.3 伏及 5.0伏核心電壓器件的編程。 下載器還不到一張名片大小,PVC磨砂塑膠封面,帶電源和狀態指示燈,高速USB2.0接口,配有豐富的延長線,適合於不同的接口定義,按Lattice並口10Pin標準接口定義設計的目標板可以直接使用我們配套的10Pin延長線來下載,其它接口定義的目標板可以用配套的9針單根的杜邦線來下載,接口定義在PVC封面和杜邦線上均有標示,可以方便的進行連接。 一般下載只需連接JTAG接口的TCK、TMS、TDI、TDO和VCC、GND這6個引腳即可,其餘針腳為針對不同芯片的可選信號,具體可以查閱光盤裡面的手冊說明。 Lattice's ispDOWNLOAD® Cable products are the hardware connection for in-system programming of all Lattice devices. After completion of the logic design and creation of a programming file with the ispLEVERTM or PAC-DesignerTM software, Lattice's ispVMTM System Software is used to control the programming of devices directly on the PC board. No additional components are required to program a device. Lattice's programming cables connect to either USB or PC Parallel ports, and use fly-wire connectors to the target system board for maximum flexibility. The cables also include adapters for easy interface to widely used 1x8 and 2x5 header configurations. The cables support programming of all Lattice devices with 1.2V, 1.8V, 2.5V, 3.3V, 5.0V core voltages. Both cables are also RoHS Compliant.
產品清單: 1、Lattice USB下載器 1個2、高速USB2.0通訊電纜【帶磁環】 1條 3、10針彩色硬質排線 1條 4、10針灰色軟質排線 1條 5、9針彩色單根杜邦線【防插反設計,已經標明接口定義】 2套 6、光盤一張 關於質保:產品本身質量問題,3個月保換,兩年免費維修。
質量保証,一個月內產品有任何問題無條件退換!一年免費保修! 備大量現貨,需訂購請速聯絡!批量價格優惠,歡迎交流洽談!
|