首頁 > 產品信息 > 化工 > 合成纖維

尼龍—6切片

特征：尼龍—6切片生產採用兩端聚合、連續萃取、聯繫乾燥和DCS控制，產品為無色透明，無機械雜誌、粒度均勻的圓柱形顆粒。切片規格（直徑×長）為2.0—2.5×2.0—2.5。

用途：尼龍—6切片粘度在2.4—3.6之間，可滿足高速紡和拉膜生產要求，廣氾用於民用絲、工業絲、尼龍6薄膜以及高強度工程塑料的生產。

Nylon 6 Chip

The nylon 6 chip plant of Baling Petrochemical is one of the largest plants in China The output or Eagle King nylon 6 chip is 42 kt annually. The primary technology and equipments of polymerization unit was imported from Germany. The main production technologies include two-state polymerization, continuous extraction, continuous drying and DCS control , which reaches the advanced international level.

Characteristics:

Nylon 6 chip is colorless transparent column-shaped particles with unitform particle size and no mechanical impurities. The specification of the chip is 2.0-2.5×2.0-2.5(diameter×length)

Application:

Nylon 6 chip has the viscosity of 2.4-3.6, satiosfying the requirement of high-speed spinning and drawing film. It can be widely used in the filed of civit yarn, industrial yarn, nylon 6 film and high-strength engineering plastics.

包裝：

用內襯鋁箔的聚丙烯編織袋或內襯鋁箔的牛皮紙包裝袋沖氮氣包裝，每袋淨重25kg。

 

尼龍—6切片技術規格（企業標準 Q/SH3185 021-2005）

Technical specification of nyion 6 chip(enterprise standard Q/SH3185 021-2005)

執行標準：Q/SH3185 021—2005

注：相對粘度在2.4~3.6範圍內可調，M為相對粘度中值，具體數值可由供需雙方商定。

Note：The relative viscosity can be adjusted from 2.4 3.6 M the medium of relative viscosity can be determined by both sides of suppliers and buyers.

①M為相對粘度中值，具體數據可由供需雙方商定。需方沒有要求是，按照M=3.45或M=3.35控制。

②可實現相對粘度在2.4—3.6範圍內可調。

③外觀質量指標—深色雜質（黃黑粒子）為判斷指標。

④外觀質量指標—連刀並條率要求應低於10%，該項作為生產過程控制指標，不作為判等指標。

⑤上述質量指標為常規檢驗指標，特殊質量指標由供需需雙方商定。

儲運：

儲于乾燥庫房，遠離火源，儲存和運輸過程中嚴禁混放易燃、易揮發的有機溶劑。