叉車、吊車八桶吊夾 YL8
« YL8系列桶夾被應用在許多工業場所對各種桶進行搬運和堆碼
« YL8 series are applied in various industrial working sites for transporting and stacking drums
« 採用獨特的鷹嘴機構,芯架可自動進行調整,快捷安全
« Use special eagle-gripper structure, with automatic adjusting core frame; speedy and safe
« YL8適用於一次性搬運8個桶,適用於集裝箱內作業
YL8is designed for carrying 8 drums at one time which is fit for operation inside containers
« 適用於港口、大型原料庫等場所大批量搬運鋼制油桶和塑料油桶及纖維桶
« Applicable for using in harbors, large-scale raw material warehouses and other places where transporting large amount of steel oil drums, PE oil drums and fibre drums
« YL8桶夾如因操作不適當,出現左右兩個芯架的夾具不同步,請將桶夾稍稍升起,並用隨桶夾配備支架的叉口端伸入任意芯架的十字叉臂墊起,然後慢慢落下桶夾至死點,就可使兩個芯架的夾具同步,就可正常使用
« Improper operation on YL8 may cause the two grippers on the left side and right side failing to be synchronized. In this case, slightly rise the grippers and use the support attached to the product: insert the fork end of the support into the cross of any one of the two core frames, rise the fork arms and lower the grippers to the freeze position, then the two grippers of two core frames can be synchronized again and can start function normally.
« 適合三噸和三噸以上的叉車
« Suitable for forklift trucks of minimum 3 ton
安全知識:
Safety Note:
« 確認油桶及其內裝物料的重量不大於本產品的最大額定載荷!
« Make sure the weight of oil drum and its content inside not exceed the maximum loading weight of this product!
« 本產品為重力式純機械夾具,請在行駛前確認桶已被安全抓牢!
« This product is gravity-type purely mechanical gripper, make sure the drum is safely and firmly gripped before driving!
« 在使用之前,應確認各種彈簧,銷軸處在正常位置,並在各種活動部位上加少許輕質機械潤滑油,以保証動作安全可靠
« Before use, make sure all springs and pins are in right positions and add some light mechanical lubricating oil on various moving parts to ensure it make safe and reliable movements.
« 在工作過程中,應避免人員處在本產品的前面和在桶的下面,轉彎或者顛簸的地方應該讓叉車減速,請謹慎使用!
« During operation, avoid the presence of personnel in front of and below the drum, and the forklift truck must be slowed down at the turning or on bumpy place, be cautious!
型號 Model | 額定負載
Loading Weight (KG) |
淨重
Net Weight (KG) |
外形尺寸
Outline Dimension (mm) |
貨叉孔尺寸
( 長*寬)Sizes of Fork Holes (Length*Width) (mm) |
YL8 | 500*8 | 390 | 1830*960*630 | 175*65 |
YL8-1 | 500*8 | 410 | 1830*960*830 | 175*65 |