首頁 > 產品信息 > 電子、電力 > 光纜和電纜電線 > 電力電纜

Type: High Voltage Application: Overhead Conductor
  Material: Aluminum Conductor Material: aluminium and steel Application:
  overhead overhead: conductor certificates: ISO9001 ISO14001

ACSR cable
 
Application:
 
AAC,AAAC,ACSR,AACSR&ACAR conductor widely used in power transmission lines with
various voltage levels.
 
ACSR is widely used in power transmission lines with various voltage levels.
 
It has the advantages as high mechanical strength, good conductivity, corrosion
resistance, easy to set up, high temperature resistance,
simple structure, convenient installation and maintenance, large transmission
capacity and is also suitable for laying across rivers and valleys where special
geographical features exist.
 
Construction:
The combination of the aluminum and steel in the conductor design offer efficient conductivity and high tensile strength, making ACSR the most economical solution for overhead power transmission and distribution projects.We have obtained certificates of ISO9001, ISO14001.
 
Specification:
All the products can perfectly meet requests of different standards.At the same time, we can design and manufacture special cables according to the required standards of customers, such as: GB, IEC, BS, ASTM, JIS, DIN and so on.
 
Since they have such good characteristics as simple structure, convenient installation and maintenance, low cost for the line, large transmission capacity and are also suitable for laying across rivers and valleys where special geographical teatures exist.

1. Specification:

(1) all aluminium conductor (AAC)
(2) all aluminimum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR)
(4) anti-corrosion type ACSR
(5) aluminimum conductor aluminimum clad steel reinforced(ACSR/AW)
(6)rear earth aluminimum conductor steel reinforced(ACSR/RE)
(7)aluminimum conductor aluminimum alloy reinforced(ACAR)

2. Elative manufacturing standards: IEC83, IEC1089, 31, B232, BS215, DIN48204.
 
1). Standard: IEC61089, BS215 part2, ASTM B232, DIN48204, BS EN50182.

2). Specification: ACSR is composed by bare concentric-lay-stranded galvanized
steel wire(s) with aluminum wires surrounded by one or more layers of helically.
Greased ACSR can also be supplied.

3). Application: ACSR is widely used in overhead electric power transmission and
distribution lines with various voltage levels.
 
All Aluminum Conductor(AAC)& Aluminum Conductor Steel Reinforced(ACSR))for ASTM (AAC, ACCR, AAAC, ACSR) Generally Confirming to IS 398 (Part-I, II, IV), IEC-228

(AAAC) Conductor as per ASTM-B-399-1992
(AAAC) Conductor as per BS-3242-1970
(AAAC) Conductor IS: 398-IV-1994
(ACSR) as per ASTM-B-233-1992
(AAC) as per BS-215-1-1970
(AAC) as per IS-398-1: 1976
(AAC) as per ASTM-B-231-1990
(ACSR) as per IS: 398-II: 1976 & IS: 398-V: 1992
(ACSR) BS-215-II-1970
(AACSR) as per IEC-1089-1191

AAC(All aluminum conductor) are suited for overhead power line.

We can supply this conductor according to different recognized standards, such as IEC61089, BS215, BS EN 50182: 2001, STM B231, CSA C49, DIN480201, JIS C3109, customer special specification also can be satisfied.

ACSR or ACSR cable or ACSR conductor used for Overhead electrical distribution and transmission lines for distributing power.

Applications:

Used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity.

Construction:

Aluminum alloy 1350-H-19 wires, concentrically stranded about a steel core. Core wire for ACSR is available with class A, B, or C galvanizing; ""aluminized"" aluminum coated (AZ); Or aluminum-clad (AW). Additional corrosion protection is available through the application of grease to the corer or infusion of the complete cable with grease.

Notes:
Resistance is calculated using ASTM standard increments of stranding and metal
conductivity of 61.2% IACS for EC (1350) and 8% IACS for steel. AC (60Hz)
resistance includes current dependent hysteresis loss factor for 1 and 3 layer
constructions.

Current ratings are based on 75oC conductor temperature, 25oC ambient, 2ft/s
wind, 96/watts/sq. Ft sun, 0.5 coefficients of emissivity and absorption.