首頁 > 產品信息 > 工業設備 > 建築及相關設備

螺杆鑽具 1螺杆鑽具 2
  • 螺杆鑽具 1
  • 螺杆鑽具 2

螺杆鑽具

型號:Downhole Motor
品牌:天合
原產地:中國
類別:工業設備 / 建築及相關設備
標籤︰油管 , 套管 , 無縫管
單價: -
最少訂量:1 件
發送查詢 添加到查詢籃

會員信息

詳細信息

天合石油機械股份有限公司

免費會員黑龙江省牡丹江市
即時通訊:点击这里给我发消息最後上線︰2023/02/20

產品描述

 

Float Shoe and Float Collar

Float Shoe and Float Collar
 
    The Float Collars and Float Shoe is used to guide the casing to be put into the hole. It can adjust the floating power of the casing when the casing been laid in. That`s can certify the qualification of the cementing. The Float Collars and Float Shoe manufactured by our company use the Spring Driving back-pressure valve type. It has a high reliability. 

    The structures are similar between Float Collar (see graphic 1 ) and Float Shoe. The lower end of the Float Collar is the pin connection which is connected with the casing. The upper end which is used for filling the cement has a cinqfoil hole which can avoid the twist. 

    The material of the Float Shoe body is the alloy steel (see graphic 2 ) . The upper end of the Float Shoe is connected with casing and its lower end is connected with the semilunar cement head. You can use the guide casing to laid it into the drilling hole. There is a back-pressure valve in the Float Shoe. You can use the oil well cement to fill the area between the Float Shoe and the body. The back-pressure can be cut by back-pressure valve. The upper hole and the lower hole will be open when the products after done . After the pressure of the circulating mud press the Valve Head into the lower place, the three collar valve on the valve tail will fall down automatically. The valve will press the valve seat tightly at the function of spring after the cement injection. And it will as a one-way valve function in the working. At that time, you could inject the mud into the pump from the upper end to the lower end, but the liquid of the well won`t be back in the casing below the valve or the outside circulation area of the casing. 

    Rubber plug (see graphic 3 ) is in the function of apart the well liquid and cement and the function of knock and press. The Rubber Plug is divided into the upper plug and the lower plug. Its main feature is it can be drilled by PDC Drill Bit.


See graphic 1            See graphic 2                                       See graphic 3                     

Specification(in)

O.D.(mm)

Total length(mm)

I.D.(mm)

Min.Dia.(mm)

Conn Type

Affordable strength of back-pressure(Mpa)

Float Collar

5

141.30

500

110

50

5 BCSG

35

5 1/2

153.67

530

112

55

5 1/2BCSG

35

7

194.46

586

162.5

77

7 BCSG

35

9 5/8

270

720

225

77

9 5/8 BCSG

35

13 3/8

365

720

319

77

133/8 BCSG

35

20

533.4

720

475

77

20 BCSG

35

Float Shoe

5

140.30

495

110

50

5 BCSG

35

5 1/2

153.67

514

122

55

5 1/2 BCSG

35

7

194.46

533

162.5

77

7 BCSG

35

9 5/8

269.88

550

225

77

9 5/8 BCSG

35

13 3/8

339.7

550

319

77

133/8 BCSG

35

20

534

652

475

77

20 BCSG

35

Casing Cement Head with Single Plug

Casing Cement Head with Single Plug
 
    It is a special tool for pumping slurry and releasing plug. Feature : 1.Quick-latch adapter is used to provide easier, faster and safer thread connection with API STC/LTC cementing casing.2. Indicator shows plug releasing.3.Balance pipe is developed. 

Technical specification and parameter 
Type
DDS
ZDS
Size.(mm)
139.7
177.8
244.5
339.7
73
88.9
127
Overall length(mm)
1400
1450
1700
1700
910
1012
1125
Manifold interface
2"union
I.D of plug container(mm)
125
160
225
320
52
72
100
Length of plug container (mm)
450
450
550
550
290
340
405
Mpa.
70
35
35
20
70
70
35

Casing Cement Head with Double Plugs

Casing Cement Head with Double Plugs
 

    The casing cement-head with double plugs (called as cement-head ) is a common cementing tool used as wellhead unit in all kinds of cementing operation. Comparing to cement-head with single plug, it owns longer cement-head body , and upper rubber plug and lower rubber plug can be put in at same time. 
    The tool owns some advantages such as simple construction, easy operation, high pressure resistant, manifold in common use, flexible in connecting. Especially, the lever type indicator can shows whether rubber plug goes through double plugs cement-head to enter casing so that operator can determine easily. 

Technical specification and parameter 

Type ST35-140 ST35-178 ST35-140 ST35-140
Size 139.7(5 1/2") 177.8(7") 244.5(9 5/8") 339.7(13 3/8")
Max.working pressure 35Mpa 35Mpa 35Mpa 20Mpa
Casing coupling thread 5  1/2"LTC/BTC 7"LTC/BTC 9  5/8"LTC/BTC 13  3/8"LTC/BTC
Manifold interface 2" union 2" union 2" union 2" union
ID of plug container (mm) 125  160 225 320
Length of plug container (mm) 450 460 560 560
Overall length 1886

產品圖片

螺杆鑽具 1
圖 1
螺杆鑽具 2
圖 2

向該會員發送查詢

天合石油機械股份有限公司

黑龍江省,牡丹江市,地明街43號,天合石油集團股份有限公司

電話︰
0086-453-5979983
傳真︰
0086-453-6531608
聯繫人︰
王迪 (國際貿易部銷售經理)
手機︰
13514598160

該公司相關產品信息

免責聲明:以上信息由企業自行提供,內容的真實性和合法性由發布企業負責。「自助貿易」對此不承擔任何保証責任。
舉報投訴:如發現違法和不良資訊,請 點此處舉報

中國供應商快速搜索︰

"建築及相關設備" 產品信息

"建築及相關設備" 供應商