| 型號： | JTR-800 |
|---|---|
| 品牌： | 勁拓 |
| 原產地： | 中國 |
| 類別： | 工業設備 / 環保設備 / 其他環保設備 |
| 標籤︰ | 二手回流焊 , 勁拓回焊爐 , 勁拓回流焊 |
| 單價： |
¥98500
/ 台
|
| 最少訂量： | 1 台 |
| 最後上線︰2023/10/29 |
| 回流焊參數 | ||||
| 型號 MODEL | VS-800II / NS-800II | VS-1000II / NS-1000II | VS-800IIX / NS-800IIX | VS-1000IIX / NS-1000IIX |
| 機體參數 GENERAL | ||||
| 外型尺寸(L*W*H) Outside Dimension(L*W*H) | 5310x1353x1490mm | 6100x1353x1490mm | 5310x1580x1490mm | 6100x1580x1490mm |
| 顏色 Standard Color | 計算機灰 Computer Grey | 計算機灰 Computer Grey | 計算機灰 Computer Grey | 計算機灰 Computer Grey |
| 重量 Weight | Approx.2250KG | Approx.2450KG | Approx.2350KG | Approx.2550KG |
| 加熱區數量 Number Of Heating Zones | 上Up8/下Bottom8 | 上Up10/下Bottom10 | 上Up8/下Bottom8 | 上Up10/下Bottom10 |
| 加熱區長度 Length Of Heating Zones | 3121mm | 3891mm | 3121mm | 3891mm |
| 冷卻區數量 Number Of Cooling Zones | 2(內置) | |||
| 排風量要求 Exhaust Volume | 10 M3 / min x 2 (通道) Exhausts | |||
| 控制部分參數 Standard Feature Of Control System | ||||
| 電氣要求 Electric Supply Required | 3 phase,380V 50/60Hz(optional: 3 phase,220V 50/60Hz 選配) | |||
| 電源功率要求 Electric Power Required | 64KW | 80KW | 64KW | 80KW |
| 啟動功率 Power For Warm Up | 30KW | 36KW | 32KW | 38KW |
| 正常功率消耗 Power Consumption | 11KW | 13KW | 12KW | 14KW |
| 升溫時間 Warming Time | 約 Approx.25 minute | 約 Approx.35 minute | ||
| 溫度控制範圍 Temp. Setting Range | 室溫 Room Temp. --- 300℃ | |||
| 溫度控制方式 Temperature Control Method | PID閉環控制 + SSR驅動 / PID Close Loop Control + SSR Driving | |||
| 溫度控制精度 Temperature Control Precision | ± 1.0℃ | |||
| PCB板溫分布偏差 Temperature Deviation on PCB | ± 1.5℃ (by JT Board Test Standard) | |||
| 加熱器 Heating Element | Especial Heating elements For Long Life ; 特製的特長壽命加熱器 | |||
| Commutated Element 整流板結構 | Aluminium Alloy Plate 鋁板 | |||
| Max. Temp. Gap Between Preheat & Reflow Setting
預熱區和焊接區之間的最大溫度設定差值 |
80℃ | |||
| Max. Temp. Gap Between Preheat Zones Setting
預熱區之間的最大溫度設定差值 |
40℃ | |||
| Max. Temp. Gap Between Reflow Zones Setting
焊接區之間的最大溫度設定差值 |
50℃ | |||
| 參數存儲 Data Storage | 可存多種生產設置參數與狀況 Process Data and Status Storage (80GB) | |||
| 異常報警 Abnormal Alarm | 溫度異常（恆溫后超高溫或超低溫）Abnormal Temperature (Extra-high / Extra-low Temp.) | |||
| 掉板報警 Board Dropped Alarm | 三色信號燈: 黃-升溫；綠-恆溫；紅-異常 Tower Light: Yellow–Warming; Green-Normal; Red-Abnormal | |||
| 運輸參數 Standard Features Of Conveyor System | ||||
| 導軌數量 | 1 Lane | 2 Lanes | ||
| Rail Structure 導軌結構 | Subsection Integrated Type 整體分段式 Subsection Separate Control分段獨立控制(Option選配) | |||
| PCB最大寬度 Max.Width Of PCB | 400mm (Option:610mm 選項) | A and B lanes width each 250mm or 1 lane 450mm and other lane 50mm | ||
| 導軌調寬範圍/調寬形式 | 50--400mm(Option:50--610mm 選項)/電動 Motorized | 50--450mm/電動 Motorized | (相關A、B線的寬度組合請參考上一欄) | |
| Range Of Rail Width/Adjustment | (Width relate to A&B, please refer item above) | |||
| 部品高度 Components Clearance | PCB板上/下各25mm , Top/ Bottom Clearance of PCB is 25mm | |||
| 運輸方向 Converyor Direction | 左向右(選配: 右向左) L→R (Option: R→L) | |||
| 運輸導軌固定方式 Fixed Rail Side | 前端固定(選配:后端固定)Front Rail Fixed(Option:Rear Rail Fixed) | 前後導軌固定，中央兩條活動. Front and Rear Rails Fixed, 2 adjustable Rail at central. | ||
| PCB運輸方式 PCB Transmission Agent | 空氣爐 Air-Reflow = 鏈條+網帶 Chain + Mesh , 氮氣爐 N2-Reflow = 鏈條 Chain (可選配網帶 Mesh is option) | |||
| 中央支撐 Center Support (選配 Option) | 防止PCB板因過寬及元器件過重而彎曲變形 Preventing PCB warp such too wide and heavy component load | |||
| 運輸帶高度 Converyor Height | 900±20mm | |||
| 運輸速度 Converyor Speed Range | 300～2000mm/min | |||
| Lubrication Auto-Afflux 潤滑油自動加註 | Standard | |||
| 回流熱工學管理分析 Thermal Management System and Analysis System | ||||
| KIC RPI焊接質量檢測系統 KIC RPI Reflow Process Inspection | 只標配于VS系列 , Standard for VS-series only | |||
| Temp. Thermocouple Slot
溫度曲線測試線 |
4 | |||
| Electrical Driven Top Hood Opening
電動打開上溫區蓋 |
標準配置 Standard | |||
| Operation Mode: Operate / Demo / Edit
三種操作模式: 運行/演示/編輯 |
標準配置 Standard | |||
| On Line Editing 在線編輯功能 | 標準配置 Standard | |||
| Cooling Method 冷卻方式 | Forced-Air 空氣冷卻 (標配Standard), Water-Chiller 冷水冷卻(選配Option) | |||
| 帶氮氣系統機型 Model for Nitrogen Process | VS-800II-N / NS-800II-N | VS-1000II-N / NS-1000II-N | VS-800IIX-N / NS-800IIX-N | VS-1000IIX-N / NS-1000IIX-N |
| 電源功率要求 Electric Power Required | 67KW | 83KW | 67KW | 83KW |
| 啟動功率 Power For Warm Up | 32KW | 38KW | 34KW | 40KW |
| 正常功率消耗 Power Consumption | 13KW | 15KW | 14KW | 16KW |
| 正常耗氮量 Nitrogen Consumption | 20M3/hr. @ 300ppm~1000ppm (O2濃度 / O2 Concentration) ; 氮氣流量計 with N2 Flow Rate Meter | |||
| 助焊劑管理 Flux Management System | 氮氣爐膛標配空氣循環過濾，優化爐內環境，易於維護保養。Flux Reclaimed and Filtration standard for N2 Oven, easy clean-up. | |||
| N2 containment at Entry and Exit End
入口及出囗氮氣保護裝置 |
標準配置 Standard | |||
| Flux Reclaim System
助焊劑回收系統 |
標準配置 Standard | |||
| Nitrogen Flow Meter 氮氣流量計 | 標準配置 Standard | |||
| Oxygen Analyser 氧氣分析儀 | 選配 Option | |||
| Nitrogen Consumption [Standard]
氮氣消耗量 (標準) |
400~1000PPM 20M³/H | |||
| Nitrogen consumption [Dilated hearth]
氮氣消耗量 (加寬機) |
500~1000PPM 25~30M³/H | |||
| 冷水機 Water Chiller | 3 HP ; 外置式 External Stand-alone Type ; 充足冷卻能力滿足無鉛工藝要求 Powerful Cooling suit to Lead-Free Process Required | |||
| 註明：氮氣機在尾號為"-N"的設備纔是標配 , Standard for N2 Oven Model With suffix of "-N" | ||||
| 付款方式︰ | 現金 |
|---|---|
| 交貨期︰ | 一週 |