DNP光源箱CCV51F CCV31F CCV51F/G代理
產品描述
| DNP Standard color Viewer |
 |
|
|
|
| The DNP Standard color Viewer is a light source which enables you to evaluate and adjust video and still cameras. With its high-frequency Fluorescent lighting method, it handles images without flicker. |
|
|
|
|
| Light source: |
DNP Standard color Viewer lamp
(Four 10W dedicated fluorescent tubes are used) |
| Power supply: |
AC100V 50, 60Hz |
| Lighting method: |
High Frequency lighting method 20KHz |
| Color rendering: |
Over 90% rendering evaluation-point for each color |
| Color temperature: |
(Measured by Minolta CL-200) |
| Operating temperature: |
10～40℃ |
| Operating humidity: |
Below 80%(avoid dew) |
| Major diameter dimension: |
375W×365H×165D m/m |
| Luminance plane dimension: |
250W×190H m/m |
| Color chart dimension: |
320W×290H m/m |
| Power consumption: |
80W |
| Weight: |
6.5kg/7.5kg |
|
|
 |
CCV-31F
CCV-51F |
|
 |
CCV-31F/G
CCV-51F/G |
|
|
|
|
| ●The Luminance plane characteristics: according to the types of self-contained fluorescent lamp |
|
| Product Type |
Luminance Color Temperature |
Lamp |
Color Temperature |
Luminance |
Color matching shift |
Weight |
| CCV-31F |
Fixed |
FL10WW-DLB |
3100K±300 |
Over 1300cd/m2 |
Within 10% |
6.5kg |
| CCV-51F |
Fixed |
FL10D-EDL-56K |
5100K±300 |
Over 1400cd/m2 |
Within 10% |
6.5kg |
| CCV-31F/G |
Volume adjustable |
FL-10WW-DLB |
3100K±300 |
Over 850～1300cd/m2 |
Within 10% |
7.5kg |
| CCV-51F/G |
Volume adjustable |
FL10D-EDL-56K |
5100K±300 |
Over 850～1400cd/m2 |
Within 10% |
7.5kg |
|
|
＊The color temperature if Luminance. Color Temperature Conversion Type viewer ranges over 50k according to the change of the Luminance.
＊The specification may change without notice |
|
|
|
|
| 【1】 |
Before using the product: |
|
| |
Power supply |
|
AC 100V, 50/60Hz shared |
| Light source |
|
10W DNP Standard color Viewer Lamp (4) |
| Power consumption |
|
80W |
|
|
| 【2】 |
Using the DNP Standard color Viewer |
|
| |
(1) |
Plug the power cable of the product into AC100V |
| |
|
| 【Precautions】 |
Do not connect any power supply other than AC100V
If the other power supply connected by accident, the inverter inside will burned out |
|
| |
(2) |
Turn on the power switch |
| |
(3) |
Lamp lights: the lamp light will stabilised after 15 to 20 minutes at the room temperature(20℃) |
| |
(4) |
If the lamp does not lit, call for Service Office for the confirmation as described on other documents. |
| |
(5) |
To suspend snaking of the lamp, press power switch 3 to 4 times [as ON/OFF]. |
|
|
| 【3】 |
If the light does not lit |
|
| |
Call for Service Office to confirm the following: |
| |
(1) |
AC 100V supplied to the wall socket. |
| |
(2) |
Plug the product into the wall socket. |
| |
(3) |
Turn the power supply switch of the product ON |
|
| |
|
 |
|
| |
Still the lamp does not lit: Consider the following: |
|
| |
|
|
|
| |
(1) |
Two of the viewer lamps lit simultaneously, one of the fuses of the inverters has blowouts. |
| |
(2) |
Four of the viewer lamps does not light means that each of the fuses of the two inverters has blowouts. |
| |
|
| 【Precautions】 |
The above occurs if the applied power supply is not AC 100V.
Fuse bum out cause internal burnout of inverter. The burned inverter needs to replace. |
|
|
|
| 【4】 |
How to replace the lamp and keep it clean |
|
| |
Place the Viewer on the flat table, and plug out the power supply cable from the wall socket.
Remove the used device in the following order: |
| |
(1) |
Unfasten the two of grub screws on the top frame. |
| |
(2) |
To remove the top frame from the main unit;
Holding 50 to 60 mm the grub screw of the top frame and press it forward. |
| |
(3) |
Remove the glass plate and acrylic plate. |
| |
|
| 【Precaution】 |
Glass plate easily breaks and may hurt your hands and fingers.
Handle the edge of the plate with care not to scratch. |
|
|
| |
◆Replacing the lamps: |
| |
(1) |
When the lamps used over 2,000 hours or one year, it needs to replace. |
| |
(2) |
Remove the Lamp Tubes: Hold the edge of the Lamp Tubes, and turn it 90 degree. |
|
| |
◆Cleaning the device: |
| |
(1) |
Impregnate alcohol to gauze then apply it onto the surface of the reflection plate / acrylic plate / glass surface to remove the dirt. |
| |
(2) |
Clean the device once in six months to one year to keep quality of the Color Temperature and Luminance. |
|
|
| 【5】 |
Other Precautions |
|
| |
Handling the viewer needs the following precautions because it contains the parts using glass. |
| |
(1) |
Do not add strong impact on the viewer |
| |
(2) |
Do not put any heavy items on the surface of the viewer |
|
產品圖片
圖 1
圖 2
免責聲明：以上信息由企業自行提供，內容的真實性和合法性由發布企業負責。「自助貿易」對此不承擔任何保証責任。
舉報投訴：如發現違法和不良資訊，請
點此處舉報。
