| 型號： | DNH-G |
|---|---|
| 品牌： | HR |
| 原產地： | 中國 |
| 類別： | 工業設備 / 其他工業設備 |
| 標籤︰ | 點焊機 |
| 單價： |
-
|
| 最少訂量： | 1 件 |
| 即時通訊: | 最後上線︰2012/05/28 |
|
基本信息
|
|||
|
該點焊機屬全自動整流子點焊機，適用於微電機、電動工具、汽車電機等直流電機生產廠家焊接電樞引線到它的換向器。
將電樞放在傳輸線上，機器自動程序控制將電樞送入焊接工位，依照設定的焊接規範，對各換向器線勾（或線槽）自動進行熱壓焊（也稱壓熔焊，通稱點焊），焊接完畢機器自動將電樞送回傳輸線上輸出；轉子在設備輸送線上自動步進，可連接到下道工序的生產流水線上。 |
|||
|
技術參數
|
|||
|
|||
|
產品特點
|
|||
1、配單機自動傳輸線，全自動點焊（電樞自動送入焊接工位、自動找首焊點、自動送回到傳輸線上輸出）；
2、歐姆龍PLC完成焊接程序控制； 3、歐姆龍液晶觸摸屏進行參數輸入操作； 4、日本MIYACHI電流控制器控制焊接電流(次級電流反饋控制)，可儲 存15種焊接規範； 5、採用紅外溫度監控，形成全閉環控制，能精確控制焊點溫度，獲得高質量的均勻焊點； 6、分度精確、快速，方便更換品種； 7、主、負電極安裝銅塊以及各發熱部分均採用循環水冷卻； 8、配有焊接煙霧排出接口； |
|||
|
英文資料
|
|||
|
DNH-G commutator spot welders
This welder is a fully automatic spot welding machine for commutators, which is suitable for the manufacturers of DC motors, such as micro motor, electric power tools, automobile motors and etc., to weld armature leading wires to their commutators.
Just put the armature at the transport line, and the machine is automatically controlled by the program to send the armature to the welding location, and then according to the pre-set welding standards, the machine automatically carries out the heating-pressure welding (it is also called pressure melting welding and they are normally called spot welding) on the line hooks (or troughs) of each commutator. After the welding is completed, the machine automatically send the armature to the transport line for output. The rotors automatically move at the transport line step by step, and can be sent to the next production line.
Equipment Characters: 1. Installed the automatic transport line of single machine; fully automatic spot welding (automatically sending the armatures to the welding location, automatically looking for the first welding point, and automatically sending the completed armatures to the transport line for output)
2. Omron PLC carries out the welding program control. 3. Parameter input by Omron touch screen. 4. Controlling the welding current (secondary refeed current control) by Japan MIYACHI current controller which can storage 15 kinds of welding standards. 5. Using the infrared temperature monitoring to form entire closed-loop control, which can accurately control the temperature of the welding points, and obtain high quality and uniform welding points. 6. Accurate calibration; fast and convenience to change the types. 7. Installed copper blocks for main and negative electrodes and cycle water cooling all the heating parts. 8. Equip a connection to discharge welding smoking. |
| 付款方式︰ | 銀行轉賬 |
|---|---|
